Showing the new SB-5 StoneSub with the Top & Bottom
fixing in position to carry 30 mm thick panels and the set StoneSub fixing
with the ShockClip mounted onto it .
Showing the new SB-5 StoneSub with the Top & Bottom
fixing in position to carry 30 mm thick panels and the set StoneSub fixing
with the ShockClip mounted onto it .
The Top & Bottom fixing ( 12 mm only ) with a 100 mm long
shaft .
Showing theOriginal Stonesub mounted onto the StoneSub 42mm x 42mm Channel
Showing the tools needed for tradesman like installation .
the 125 mm wet cutter , the 6 mm Router and the 100 mm diamond grinder .
Showing the underside of a 30 mm thick panel of Sandstone
with the Top & Bottom bracket installed so it is flush with bottom of panel
Showing the top & Bottom bracket installed into a 30 mm
thick piece of Blue Stone.
Showing the shaft sticking out the back of the panels and
how snug they fit when installed --the carry the load above without any
Epoxy
Showing the front panels flush after installation of the
clips .