StoneSub Application

Showing the new SB-5 StoneSub with the Top & Bottom fixing in position to carry 30 mm thick panels and the set StoneSub fixing with the ShockClip mounted onto it .

Showing the new SB-5 StoneSub with the Top & Bottom fixing in position to carry 30 mm thick panels and the set StoneSub fixing with the ShockClip mounted onto it .

The Top & Bottom fixing ( 12 mm only ) with a 100 mm long shaft .

Showing theOriginal Stonesub mounted onto the StoneSub 42mm x 42mm Channel

Showing the tools needed for tradesman like installation . the 125 mm wet cutter , the 6 mm Router and the 100 mm diamond grinder .

Showing the underside of a 30 mm thick panel of Sandstone with the Top & Bottom bracket installed so it is flush with bottom of panel

Showing the top & Bottom bracket installed into a 30 mm thick piece of Blue Stone.

Showing the shaft sticking out the back of the panels and how snug they fit when installed --the carry the load above without any Epoxy

Showing the front panels flush after installation of the clips .

SB-5 with DOUBLE HEAD x 16mm Shaft